The machine familiar problem of the laser carvings
One, the machine have difference to ring or have the breakdown of teeth of a saw to order
1, lead a round to roll over ineffective live and lead a track to there is glide rubbing or leading a round broken
2, the part lead a round with lead a track to have cleft
3, slippery piece with lead track cleft aggrandizement, have loose move phenomenon
4, horizontal beam and side plank be off plumb
5, X, Y to bring to the stretch rotation to move not vivid
6, synchronously take loose tightly unwell
7, small car glide the Yin dint lead greatly or have an excrescent voice ring, horizontal beam direction sport the resistance lead greatly or have an excrescent voice ring
8, the synchronous round be loose to move
9, spread to move stalk bearings damage
Two, the laser head doesn't give out light
1, press the operation a front-panel's test's key view to check electric current form appearance:
¢Ù has no electric current:Checking laser power supply power supply whether connect, whether high pressure line loosens to move or shed off or not, whether signal line loosens to move or not;
¢Ú has electric current:Check mirror slice whether fall in pieces, whether light road seriously is partial to move or not;
2, check water circle whether system is normal or not:
¢Ù Impassability water:Check water pump whether damage or switch on electricity;
¢Ú Water:The check enters the water, water whether connect anti- or pipe line break, water current whether normal;
¢Û check water sensor is out of order or not;
3, can order to shoot, the ability sends out a data not to give out light from the check(check computer constitution whether correct)
Three, the carvings depth be not and deeply different or engrave
1, the system water current of the check water circle whether fluency;(the pipe line be curved to fold or the pipe line break)
2, whether check focal distance is normal or not;(re- correct)
3, check light whether road is normal or not;(re- correct)
4, check horizontal beam whether parallelism;(regulate both sides leather belt)
5, check mirror whether slice fall in pieces or not;(replace)
6, the check mirror slice or laser tube blast-off carry whether is pollute;(re- clean)
7, check water temperature whether the Gao is at 30 ¡æ ;(replace circulation water)
8, check laser head or focuse whether mirror loosens to move or not;(step up)
9, the laser electric current light strong beard attain 8 mAs;
10, the laser tube be aging(replace:Protect to fix a period free charge);
Four, reset not and normally
1, the check spread a feeling machine diode whether fall in pieces, whether magnetic iron magnetic force is normal or not;
2, spread the feeling machine signal line's contact bad or damaged;
3, check ground line contact whether whether credibility or high pressure line are damaged or not;(re- connect ground or replace high pressure line)
4, the electrical engineering line's contact be bad.
Five, engrave in disorder
1, the beginning start to turn inaccuracy and have already sent out a data;
2, the operation order reverse;
3, static electricity interference;(check ground whether line shed off or not)
4, whether check computer has virus or not
Six, the computer can't output
1, the parameter constitution of the check software whether normal;(re- establish)
2, check ground whether line is dependable or not, static electricity whether interference data line;(re- connect ground)
3, re- install software to lay equal stress on a new constitution test;
4, whether check computer has virus or not
